[nycbug-talk] Reproducible data corruption on 6.1-Stable [Long but please read]

Isaac Levy ike at lesmuug.org
Wed Sep 13 21:23:44 EDT 2006


Hi Jonathan,

Here's my dmesg, (posted in full below yours),

you have:
> ad4: 305245MB <Seagate ST3320620AS 3.AAC> at ata2-master UDMA133
> ad6: 305245MB <Seagate ST3320620AS 3.AAC> at ata3-master UDMA133

I have:
ad4: 152627MB <WDC WD1600JS-55NCB1 10.02E01> at ata2-master UDMA33

I believe it's the ad driver, something has changed.  Lets take this  
over to the STABLE list?

Best,
.ike





On Sep 13, 2006, at 7:00 PM, Jonathan Stewart wrote:

> uname -a:
> FreeBSD XXXXX 6.1-STABLE FreeBSD 6.1-STABLE #0: Sun Sep 10 22:54:17  
> EDT
> 2006     root at XXXXX:/usr/obj/usr/src/sys/SERVER  i386
>
> dmesg:
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,  
> 1994
>         The Regents of the University of California. All rights  
> reserved.
> FreeBSD 6.1-STABLE #0: Sun Sep 10 22:54:17 EDT 2006
>     root at XXXXX:/usr/obj/usr/src/sys/SERVER
> mptable_probe: MP Config Table has bad signature: 4\^C\^_
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) XP 3200+ (2090.16-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
>
> Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG 
> E,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>   AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
> real memory  = 1073676288 (1023 MB)
> avail memory = 1041698816 (993 MB)
> kbd1 at kbdmux0
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,  
> RF5413)
> acpi0: <Nvidia AWRDACPI> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> Correcting nForce2 C1 CPU disconnect hangs
> agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at
> device 0.0 on pci0
> pci0: <memory, RAM> at device 0.1 (no driver attached)
> pci0: <memory, RAM> at device 0.2 (no driver attached)
> pci0: <memory, RAM> at device 0.3 (no driver attached)
> pci0: <memory, RAM> at device 0.4 (no driver attached)
> pci0: <memory, RAM> at device 0.5 (no driver attached)
> isab0: <PCI-ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
> ohci0: <OHCI (generic) USB controller> mem 0xe1085000-0xe1085fff irq 5
> at device 2.0 on pci0
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0, legacy support
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xe1082000-0xe1082fff irq 5
> at device 2.1 on pci0
> ohci1: [GIANT-LOCKED]
> usb1: OHCI version 1.0, legacy support
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 3 ports with 3 removable, self powered
> ehci0: <NVIDIA nForce2 USB 2.0 controller> mem  
> 0xe1083000-0xe10830ff irq
> 12 at device 2.2 on pci0
> ehci0: [GIANT-LOCKED]
> usb2: EHCI version 1.0
> usb2: companion controllers, 4 ports each: usb0 usb1
> usb2: <NVIDIA nForce2 USB 2.0 controller> on ehci0
> usb2: USB revision 2.0
> uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub2: 6 ports with 6 removable, self powered
> nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xe400-0xe407 mem
> 0xe1084000-0xe1084fff irq 12 at device 4.0 on pci0
> nve0: Ethernet address 00:0c:6e:7d:e0:79
> miibus0: <MII bus> on nve0
> rlphy0: <RTL8201L 10/100 media interface> on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> nve0: Ethernet address: 00:0c:6e:7d:e0:79
> pci0: <multimedia, audio> at device 5.0 (no driver attached)
> pci0: <multimedia, audio> at device 6.0 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> atapci0: <HighPoint HPT372N UDMA133 controller> port
> 0xa000-0xa007,0xa400-0xa403,0xa800-0xa807,0xac00-0xac03,0xb000-0xb0ff
> irq 11 at device 6.0 on pci1
> ata2: <ATA channel 0> on atapci0
> ata3: <ATA channel 1> on atapci0
> pci1: <multimedia, audio> at device 9.0 (no driver attached)
> pci1: <input device> at device 9.1 (no driver attached)
> atapci1: <nVidia nForce2 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on  
> pci0
> ata0: <ATA channel 0> on atapci1
> ata1: <ATA channel 1> on atapci1
> pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f
> mem 0xdd000000-0xdd00007f irq 5 at device 1.0 on pci2
> miibus1: <MII bus> on xl0
> acphy0: <AC101L 10/100 media interface> on miibus1
> acphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xl0: Ethernet address: 00:26:54:10:8c:0f
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <display, VGA> at device 0.0 (no driver attached)
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2  
> on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags  
> 0x10 on
> acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq  
> 7 drq
> 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2  
> on acpi0
> fdc0: does not respond
> device_attach: fdc0 attach returned 6
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xd0000-0xd17ff,0xd6000-0xd67ff on  
> isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff  
> on isa0
> Timecounter "TSC" frequency 2090164914 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 194481MB <Maxtor 6L200R0 BAH41G10> at ata0-master UDMA133
> acd0: DVDROM <CREATIVE DVD-ROM DVD1241E/VER 0.44> at ata0-slave UDMA33
> ad4: 305245MB <Seagate ST3320620AS 3.AAC> at ata2-master UDMA133
> ad6: 305245MB <Seagate ST3320620AS 3.AAC> at ata3-master UDMA133
> ar0: 610490MB <HighPoint v2 RocketRAID RAID0 (stripe 16 KB)>  
> status: READY
> ar0: disk0 READY using ad4 at ata2-master
> ar0: disk1 READY using ad6 at ata3-master
> Trying to mount root from ufs:/dev/ad0s1a

$ uname -a && dmesg
FreeBSD monkey.jmg.lan 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sun May  7  
04:42:56 UTC 2006     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/ 
SMP  i386
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.14-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf62  Stepping = 2
    
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20000000<LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2092068864 (1995 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, interrupt controller> at device 0.5 (no  
driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
atapci0: <GENERIC ATA controller> port  
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f, 
0xd000-0xd0ff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 20 at  
device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc880-0xc89f irq 22 at  
device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at  
device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc480-0xc49f irq 23 at  
device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf8fffc00-0xf8fffcff irq  
21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem  
0xf8fff800-0xf8fff8ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:17:31:ee:7f:cb
pcib3: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia> at device 1.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe800-0xe8ff  
mem 0xfbfffc00-0xfbfffcff irq 17 at device 5.0 on pci4
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re0: Ethernet address: 00:14:6c:c0:14:cc
re1: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe400-0xe4ff  
mem 0xfbfff800-0xfbfff8ff irq 18 at device 6.0 on pci4
miibus2: <MII bus> on re1
rgephy1: <RTL8169S/8110S media interface> on miibus2
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re1: Ethernet address: 00:14:6c:c0:13:29
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10  
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
Timecounter "TSC" frequency 3000143580 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a91928
acd0: DVDR <LITE-ON DVDRW SHW-160P6S/PS0A> at ata0-slave UDMA33
ad4: 152627MB <WDC WD1600JS-55NCB1 10.02E01> at ata2-master UDMA33
Trying to mount root from ufs:/dev/md0
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.14-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf62  Stepping = 2
    
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20000000<LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2092068864 (1995 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, interrupt controller> at device 0.5 (no  
driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
atapci0: <GENERIC ATA controller> port  
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f, 
0xd000-0xd0ff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 20 at  
device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc880-0xc89f irq 22 at  
device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at  
device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc480-0xc49f irq 23 at  
device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf8fffc00-0xf8fffcff irq  
21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem  
0xf8fff800-0xf8fff8ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:17:31:ee:7f:cb
pcib3: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia> at device 1.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe800-0xe8ff  
mem 0xfbfffc00-0xfbfffcff irq 17 at device 5.0 on pci4
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re0: Ethernet address: 00:14:6c:c0:14:cc
re1: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe400-0xe4ff  
mem 0xfbfff800-0xfbfff8ff irq 18 at device 6.0 on pci4
miibus2: <MII bus> on re1
rgephy1: <RTL8169S/8110S media interface> on miibus2
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re1: Ethernet address: 00:14:6c:c0:13:29
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10  
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
Timecounter "TSC" frequency 3000140205 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a91928
acd0: DVDR <LITE-ON DVDRW SHW-160P6S/PS0A> at ata0-slave UDMA33
ad4: 152627MB <WDC WD1600JS-55NCB1 10.02E01> at ata2-master UDMA33
Trying to mount root from ufs:/dev/md0
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...10 8 0 0 0 done
All buffers synced.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights  
reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
     root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) D CPU 3.00GHz (3000.13-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf62  Stepping = 2
    
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE 
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe43d<SSE3,RSVD2,MON,DS_CPL,VMX,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20000000<LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
real memory  = 2147155968 (2047 MB)
avail memory = 2096103424 (1999 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, interrupt controller> at device 0.5 (no  
driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
atapci0: <GENERIC ATA controller> port  
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f, 
0xd000-0xd0ff irq 21 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 20 at  
device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc880-0xc89f irq 22 at  
device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at  
device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc480-0xc49f irq 23 at  
device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf8fffc00-0xf8fffcff irq  
21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem  
0xf8fff800-0xf8fff8ff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:17:31:ee:7f:cb
pcib3: <ACPI PCI-PCI bridge> at device 19.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <multimedia> at device 1.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe800-0xe8ff  
mem 0xfbfffc00-0xfbfffcff irq 17 at device 5.0 on pci4
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re0: Ethernet address: 00:14:6c:c0:14:cc
re1: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe400-0xe4ff  
mem 0xfbfff800-0xfbfff8ff irq 18 at device 6.0 on pci4
miibus2: <MII bus> on re1
rgephy1: <RTL8169S/8110S media interface> on miibus2
rgephy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto
re1: Ethernet address: 00:14:6c:c0:13:29
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10  
on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on  
isa0
Timecounters tick every 1.000 msec
acd0: DVDR <LITE-ON DVDRW SHW-160P6S/PS0A> at ata0-slave UDMA33
ad4: 152627MB <WDC WD1600JS-55NCB1 10.02E01> at ata2-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s1a
$



More information about the talk mailing list