All<br>  So I wanted to point out , I had no intention of removing any of the safety controls. I wanted to just remove some of the extra  sensors / controls added to improve efficiency and lower emissions; to improve reliability by simplifying the controls and removing extra trip points in the boiler control. Most of the boilers I saw had senors to trip the boiler , IE shut it down safely , if the system is not running efficiently. IMHO I want heat when its cold, and it the system trips because its only running at 70% efficiency I will be super pissed . Other then that I wanted to , in the event of a power failure, a simple way to run the system off a battery. Either a UPS or a home brewed setup ; using an inverter and maybe a solar charger.   <br>
<br>Based on what everyone said the best setup I see here is this  Boiler -> Step-down transformer - > NEMA 5-20p plug -> NEMA 5-20r socket -> existing 20amp circuit  .  This way I could reuse a UPS I have to run the setup for some time. <br>
<br><br>Then if I wanted to in modify this for stand-by power would do this,  <br><br><br>Boiler -> Furnace transfer switch*---> 24VAC Step-down transformer  -> NEMA 5-20p plug -> NEMA 5-20r socket -> existing 20amp circuit                                         |<br>
                                                  |<br>                                                  \----> 24VDC to 24VAC inverter -> 24VDC Power , batteries solar etc <br><br><br><br><a href="http://www.electricgeneratorsdirect.com/Reliance-Controls-TF201W/p1096.html">http://www.electricgeneratorsdirect.com/Reliance-Controls-TF201W/p1096.html</a><br>
<a href="http://www.powerstream.com/inv-24vdc-24vac.htm">http://www.powerstream.com/inv-24vdc-24vac.htm</a><br><br>What do you all think, and I missing something ?<br><div class="gmail_extra"><br><br><div class="gmail_quote">
On Tue, Jan 8, 2013 at 12:01 AM, Raul Cuza <span dir="ltr"><<a href="mailto:raulcuza@gmail.com" target="_blank">raulcuza@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
> <snip><br>
<div class="im">> The 24VAC is run off the secondary of the 120VAC transformer.  Look at the<br>
> wiring diagram on your boiler/owners manual...<br>
<br>
</div>The diagrams are also available online if you want to see the<br>
controller diagram before purchasing. E.G.<br>
<a href="http://www.lennox.com/pdfs/installation_maintenance/Lennox_GWB8-IE_IOM.pdf" target="_blank">http://www.lennox.com/pdfs/installation_maintenance/Lennox_GWB8-IE_IOM.pdf</a><br>
<br>
I agree with Brett, but as a non-licensed non-professional<br>
non-electrician (a physic degree can be a dangerous thing), that a UPS<br>
would be the best way to go.<br>
<br>
Almost restrained myself from making a comment about using a server<br>
farm instead of a boiler to heat the house.<br>
<br>
Raúl<br>
</blockquote></div><br><br clear="all"><br>-- <br><br>Mark Saad | <a href="mailto:mark.saad@ymail.com" target="_blank">mark.saad@ymail.com</a>
</div>