[CDBUG-talk] Dell R210
kevinmca1 at verizon.net
Sat Jun 4 00:48:05 EDT 2011
Greetings from Voorheesville!
The sanest thing you could possibly do is copy off any data from that
drive which you need to keep and then boot from the DVD snapshot and go
the normal sysinstall route.
You cannot normally do a freebsd-upgrade from a release version to a
stable, and so the only way is through csup on an existing system.
>From my own notes here at the KNOS Project (forget where I copypasta'd
this from a long while ago but never bothered)
--- begin notes ---
this process contains two main steps: fetching the sources, and
compiling and installing the system.
Step 1 can easily be done by using csup (it's in the base) with the
This into /etc/make.conf:
SUPFLAGS= -g -L 2
This into /etc/sup/stable.sup:
*default release=cvs tag=RELENG_8
*default delete use-rel-suffix
You can of course select a mirror near your location.
The tag= parameter selects what you will get, e. g. a certain specific
RELEASE, patches for a RELEASE, STABLE, or even CURRENT. The keyword
RELENG_8 will give you 8-STABLE.
If you've updated your sorces, read /usr/src/UPDATING, and for the steps
how to start, refer to /usr/src/Makefile. You can also add compiling
options to /etc/make.conf to be involved here; a typical setting could
be setting CPUTYPE.
Then you start.
# cd /usr/src
# make buildworld buildkernel
# make installkernel
Then reboot into single user mode:
When arriving at single user mode, check your partitions via fsck, and
then mount them (mount -a).
# cd /usr/src
# mergemaster -p
# make installworld
# make delete-old
When you now have reached multi user mode again, finally do
# cd /usr/src
# make delete-old-libs
Check the result via
# uname -a
If you do have a custom kernel, add KERNCONF=<name> to the make
calls, e. g.
# make buildkernel KERNCONF=FOOBAR
# make installkernel KERNCONF=FOOBAR
Finally, see the excellent documentation in the FreeBSD Handbook. It
should cover everything that hasn't been mentioned yet.
The KNOS Project
On Fri, 2011-06-03 at 22:32 -0400, Jaime wrote:
> On Thu, May 26, 2011 at 4:28 PM, Chuck Atkins <chuck.atkins at kitware.com> wrote:
> > Now I'm not 100% certain of this (in otherwords I haven't been using an H200
> > with FreeBSD) but from what I've pieced together on the mailing lists, your
> > controller should be supported in 8-STABLE (not 8.2-RELEASE though).
> I burned the ISO that you pointed me toward. It boots the system and
> sees the disks as /dev/da0 and /dev/da1. (RAID isn't working, sadly.)
> So now that I can boot, how do I load 8-STABLE instead of 8.2-RELEASE
> onto the hard drive?
> Sorry to sound hopeless. I tried setting the options to 8-STABLE, but
> it didn't find the files over FTP. So I loaded 8.2-RELEASE, but it
> couldn't boot. (Not a big surprise.) So I'm kind of out of ideas.
> Any suggestions?
> Thanks in advance,
> CDBUG-talk mailing list
> CDBUG-talk at lists.nycbug.org
More information about the CDBUG-talk