[nycbug-talk] installing cat5 cabling
Fri Jul 22 17:57:50 EDT 2005
alex at pilosoft.com wrote:
> On Fri, 22 Jul 2005, Charles Sprickman wrote:
>>One of my clients is going to be moving in the next month. One thing no
>>one really thought about (at least as far as cost) is the network
>>cabling. Wow... I had no idea that it averaged about $150/jack, with a
>>small discount for multi-outlet jacks (for example $120/jack on a quad
>>jack). At 42 jacks, that hurts. Lots. We are already in a good deal
>>of cash for construction, A/C for the small co-lo, and upgrading the
> Union labor will be more than that.
>>So after talking with a few of the guys that work in the office, we
>>thought we should look at taking this on ourselves. We all can work a
>>punchdown tool and a cable tester, and at the prices we were quoted, the
>>install was pretty simple; they are just going to tie-wrap the cables to
>>the electrical conduit (it's a pretty bare SoHo space). Originally I
>>balked at doing it as I don't do conduit, but apparently no one else
>>does for under $300/jack anyhow. :)
> Check whether the building will *allow* you do to that.
>>We're only looking at a dozen desks, but the support guys each can eat
>>up a half-dozen jacks, and we're putting our phone system in the same
>>cabling setup so we can easily convert to VoIP in a few months.
>>Everything goes back to a patch panel so support guys can easily get a
>>POTS or (S/A)DSL line to their desks, or pull in another network for
>>testing, etc. I think 42 jacks is not really overkill.
>>It looks like we need about 6300' of cable, a few patch panels, the
>>surface mount boxes, 2/4/6/8 outlet jacks, lots of tie wraps, a new
>>punchdown tool and a decent cable tester.
>>Does anyone here have a favorite vendor for cabling supplies? I need to
>>break out labor vs. parts on this to decide if we want to take a few
>>employees over and do this ourselves, but I'm not familiar with any of
>>the vendors out there. Local or mail order, either is fine.
> Home Depot has all of the above. Or you can go with graybar if you want
> wider selection.
Ditto on Alex's points. . .
but also, you may want to check with Manhattan Electronics on ~45th
Street for materials and any other questions.
I haven't dealt with them in a while, but they will discount stuff (I
think) if you are doing this as a consultant. . .
More information about the talk