[nycbug-talk] X on OpenBSD & nycbug.org down

Josh McCormack joshmccormack
Fri Nov 11 22:56:44 EST 2005



Okan Demirmen wrote:

> On Fri 2005.11.11 at 00:31 -0500, Josh McCormack wrote:
> 
>>Also, I'm having troubles getting X working on my new install of OpenBSD 
>>3.8 on a Presario 1200. Any help would be appreciated.
> 
> 
> more info may help - dmesg? what's the issue exactly?

Thanks for the help.

The issue: ran X -configure, then did the test. Screen goes black.

Here's dmesg:

OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 532 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 196648960 (192040K)
avail mem = 172568576 (168524K)
using 2426 buffers containing 9936896 bytes (9704K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(76) BIOS, date 07/14/00, BIOS32 rev. 0 @ 0xfd720
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 1%
apm0: AC on, battery charge critical, charging
apm0: battery life expectancy 1%
apm0: AC on, battery charge critical, charging
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf70/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8501" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT8501 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i7 AGP" rev 0x5d
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x19
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66, 
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6015MAP>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1007> SCSI0 
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x0a: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x20: HWM disabled
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x21: irq 11
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auvia0
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 CardBus" rev 
0x00: irq 9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: 
address 00:00:86:55:12:15
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
syncing disks... done

The operating system has halted.
Please press any key to reboot.

rebooting...
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 532 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 196648960 (192040K)
avail mem = 172568576 (168524K)
using 2426 buffers containing 9936896 bytes (9704K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6b) BIOS, date 07/14/00, BIOS32 rev. 0 @ 0xfd720
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 14%
apm0: AC on, battery charge critical, charging
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf70/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8501" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT8501 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i7 AGP" rev 0x5d
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x19
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66, 
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6015MAP>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1007> SCSI0 
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x0a: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x20: HWM disabled
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x21: irq 11
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auvia0
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 CardBus" rev 
0x00: irq 9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: 
address 00:00:86:55:12:15
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
syncing disks... done

The operating system has halted.
Please press any key to reboot.

rebooting...
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
     deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD-K6(tm)-III Processor ("AuthenticAMD" 586-class) 435 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX
real mem  = 196648960 (192040K)
avail mem = 172568576 (168524K)
using 2426 buffers containing 9936896 bytes (9704K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(c7) BIOS, date 07/14/00, BIOS32 rev. 0 @ 0xfd720
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 35%
apm0: AC on, battery charge low, charging
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd720/0x8e0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf70/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8501" rev 0x04
ppb0 at pci0 dev 1 function 0 "VIA VT8501 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Trident CyberBlade i7 AGP" rev 0x5d
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x19
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66, 
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6015MAP>
wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2402, 1007> SCSI0 
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x0a: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x20: HWM disabled
auvia0 at pci0 dev 7 function 5 "VIA VT82C686 AC97" rev 0x21: irq 11
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auvia0
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 9 function 0 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1211 CardBus" rev 
0x00: irq 9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
biomask ef6d netmask ef6d ttymask ffef
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
ep1 at pcmcia0 function 0 "3Com, OfficeConnect 572B, B" port 0xa000/32: 
address 00:00:86:55:12:15
tqphy0 at ep1 phy 0: 78Q2120 10/100 PHY, rev. 10
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302





More information about the talk mailing list