[nycbug-talk] APU

[Jared Davenport]

On 12/18/2013 09:11 PM, Jim B. wrote:
> * Jared Davenport <jared at thegridsource.com> [2013-12-18 12:20]:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hey everyone, first time posting here!
>>
>> I'm evaluating the APU from PC Engines. The specs for this are here:
>> http://www.pcengines.ch/apu.htm. The board also has a single 16gb
>> m-SATA SSD.
>>
>> OpenBSD dmesgd: http://www.nycbug.org/?action=dmesgd&dmesgid=2504
>>
>> I'm having trouble getting FreeBSD 10-RC2 (amd64 & i386) to boot,
>> using memstick installer on a USB drive. Here are modifications I made
>> to the installer image (the board has no VGA):
>>
>> /boot/loader.conf
>> - -> http://pastebin.com/QVZszqMS
>>
>> /etc/ttys
>> - -> http://pastebin.com/uXdXbZ02
>>
>> FreeBSD 10-RC2 boot message:
>> - -> http://pastebin.com/H9402e7j
>>
>> The system stops responding after the last line, with no further
>> messages.  Oddly, pfSense is booting fine, using
>> pfSense-memstick-serial-2.1-RELEASE-amd64.img:
>> - -> http://pastebin.com/KHyyQrCm
>>
>> So far, it's only FreeBSD that's having this problem. Any suggestions?
>>
>> Bonus pic!  http://i.imgur.com/QX63jrx.jpg (ignore the strange power
>> connector)
> 
> 
> Hello Jared,
> 
> Try adding these lines to the loader.conf file.  
> 
> verbose_loading="YES"            # Set to YES for verbose loader output
> boot_verbose="-v"                # -v: Causes extra debugging information to be printed
> 
> Also, try getting to a shell in your pfsense system and running dmesg.  You
> might be able to compare the output you have with the pfsense dmesg and
> find some differences.

Thanks Jim,

I went ahead and added those lines.  Here is the verbose output:

  http://pastebin.com/DUhrt8uP



> 
> Cheers,
> Jim B.
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 555 bytes
Desc: OpenPGP digital signature
URL: <http://lists.nycbug.org/pipermail/talk/attachments/20131218/651f0f13/attachment.bin>