[nycbug-talk] FreeBSD Dual homed
Brian McGonigle
brian.mcgonigle at gmail.com
Thu Dec 20 20:19:35 EST 2007
Try lowering the MTU or disabling PMTU discovery. I have never seen PMTU
discovery work on FreeBSD. I always use a lower MTU when going over a WAN.
On Dec 20, 2007 4:24 PM, Rodrique Heron <swygue at gmail.com> wrote:
>
>
> Dan Langille wrote:
> > ... I think I misunderstood you in my original reply.
> >
> > Rodrique Heron wrote:
> >> Hello all-
> >>
> >> Are there any known issues when FreeBSD is dual homed.
> >
> > There may be issues, but I have run dual homed FreeBSD since 1998.
> >
> >
> >> I have two interfaces, each connected to a different subnet. Whenever
> >> both are enabled I can't get any incoming network traffic to the
> server.
> >
> > Can you elaborate upon this? It's not clear what you are trying to do.
> >
> > So one NIC fails to work? No traffic in or out? Both nics?
> >
> > Output of netstat -na would help us understand.
> >
> > > I'm not
> >> routing between the two, therefore no "gateway_enable" in rc.conf. I
> >> don't have any firewalls enabled, I do have my defaultrouter set.
> >
> > I originally said:
> > AFAIK, you cannot route between the two UNLESS you have
> > gateway_enable="YES" in /etc/rc.conf.
> >
> > But what you mean is that you do not wish to route between the two
> > subnets. The FreeBSD box is not a gateway. It is merely dual homed.
> >
> >
> >
> >
> Hope this helps-
>
>
> # sockstat -4
> root sendmail 628 3 tcp4 127.0.0.1:25 *:*
> root sshd 609 4 tcp4 *:22 *:*
>
>
>
>
>
> # ifconfig -a
>
> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>
> options=b<RXCSUM,TXCSUM,VLAN_MTU>
>
> inet 150.210.240.36 netmask 0xffffff00 broadcast 150.210.240.255
>
> ether 00:14:22:23:1a:2e
>
> media: Ethernet autoselect (1000baseTX <full-duplex>)
>
> status: active
>
> em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>
> options=b<RXCSUM,TXCSUM,VLAN_MTU>
>
> inet 150.210.160.243 netmask 0xffffff00 broadcast 150.210.160.255
>
> ether 00:14:22:23:1a:2f
>
> media: Ethernet autoselect (1000baseTX <full-duplex>)
>
> status: active
>
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
>
> inet6 ::1 prefixlen 128
>
> inet 127.0.0.1 netmask 0xff000000
>
>
>
>
>
> # arp -an
>
> ? (150.210.160.204) at 00:00:5e:00:01:04 on em1 [ethernet]
>
> ? (150.210.160.214) at 00:0b:db:90:73:1f on em1 [ethernet]
>
> ? (150.210.160.227) at 00:11:43:ef:ba:36 on em1 [ethernet]
>
> ? (150.210.160.254) at 00:00:0c:07:ac:04 on em1 [ethernet]
>
> ? (150.210.240.32) at 00:0c:29:62:78:63 on em0 [ethernet]
>
> ? (150.210.240.39) at 00:0c:29:f8:e7:2c on em0 [ethernet]
>
> ? (150.210.240.55) at 00:1a:64:24:ce:bc on em0 [ethernet]
>
>
>
>
>
> # netstat -rn -f inet
>
> Routing tables
>
>
>
> Internet:
>
> Destination Gateway Flags Refs Use Netif Expire
>
> default 150.210.160.254 UGS 0 415 em1
>
> 127.0.0.1 127.0.0.1 UH 0 0 lo0
>
> 150.210.160/24 link#2 UC 0 0 em1
>
> 150.210.160.204 00:00:5e:00:01:04 UHLW 1 18 em1 552
>
> 150.210.160.214 00:0b:db:90:73:1f UHLW 1 5 em1 654
>
> 150.210.160.227 00:11:43:ef:ba:36 UHLW 1 3 em1 747
>
> 150.210.160.254 00:00:0c:07:ac:04 UHLW 2 0 em1 547
>
> 150.210.240/24 link#1 UC 0 0 em0
>
> 150.210.240.32 00:0c:29:62:78:63 UHLW 1 6 em0 547
>
> 150.210.240.39 00:0c:29:f8:e7:2c UHLW 1 12 em0 547
>
> 150.210.240.55 00:1a:64:24:ce:bc UHLW 1 8 em0 743
>
>
>
>
> _______________________________________________
> talk mailing list
> talk at lists.nycbug.org
> http://lists.nycbug.org/mailman/listinfo/talk
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.nycbug.org:8443/pipermail/talk/attachments/20071220/dc6e203e/attachment.htm>
More information about the talk
mailing list