[nycbug-talk] Nas4Free and LCD display - or specifically FreeBSD & CWlinux LCDProc

[Brian Callahan]

On 6/17/2013 7:25 PM, Nick Danger wrote:
> I got a display for my Nas4Free server. Its a CWLinux 1602 usb LCD
> display. It is supported by LCDProc. I can plug it into my Linux box and
> use the little test script to pump output to it and set the backlight
> and other settings. When I plug it into my Nas4Free box, it does show
> up, but I don't know how to address it.
>
> Jun 17 19:15:43 triumph kernel: ugen2.2: <Prolific Technology Inc.> at
> usbus2
> Jun 17 19:15:43 triumph kernel: uplcom0: <Prolific Technology Inc.
> USB-Serial Controller, class 0/0, rev 1.10/3.00, addr 2> on usbus2
>
> Since there is no /dev/ttyUSB2, I have no idea how I address this
> device. I am assuming the Nas4Free issue is I just have to set the
> configuration correct, but when the second line of the config is
> "device=/dev/ttyUSB0", Im stumped at line 2 ;-)
>

Wouldn't this be "device=/dev/cuaU0"?

> Any ideas?
>
> Thanks
> Nick
>
> _______________________________________________
> talk mailing list
> talk at lists.nycbug.org
> http://lists.nycbug.org/mailman/listinfo/talk