[talk] Fwd: Meet to hack on new Intel Atom SoC board

Mark Saad mark.saad at ymail.com
Sat Feb 27 10:28:18 EST 2016




> On Feb 27, 2016, at 1:24 AM, Sujit K M <kmsujit at gmail.com> wrote:
> 
>> On Sat, Feb 27, 2016 at 7:22 AM, Mark Saad <mark.saad at ymail.com> wrote:
>> Some further up talk .
> 
> I found it difficult to understand what is being tried/or an attempt
> at porting is being
> done. I mean just configure the kernel according to specs and trying
> would be better.
> Or I am missing something?

Two points I got from this . The on chip storage has a new interface type , that isn't sata or ide . Like the emmc on some arm devices . Also there is some odd issue with the serial ports . 
---
Mark Saad | mark.saad at ymail.com


> 
>> ---
>> Mark Saad | mark.saad at ymail.com
>> 
>> Begin forwarded message:
>> 
>> From: "Lundberg, Johannes" <johannes at brilliantservice.co.jp>
>> Date: February 26, 2016 at 6:51:47 PM EST
>> To: freebsd-hackers at freebsd.org, FreeBSD Current
>> <freebsd-current at freebsd.org>
>> Subject: Meet to hack on new Intel Atom SoC board
>> 
>> Hi
>> 
>> My three boards from UP has arrived. At last, an Intel based small sized
>> dev board!
>> http://up-shop.org/
>> 
>> This is an early developer version board with the new super low power 14nm
>> x5-Z8300 CPU (CherryTrail) with 16GB eMMC and 1GB RAM (a bit different from
>> the specs of the final version).
>> 
>> Any kernel hackers in the Bay Area (south of San Francisco) who are
>> interested to get together next week and get FreeBSD running on it? (Pizza
>> on me :)
>> 
>> I can also lend a couple of boards to anyone who wants to continue hacking
>> after the meeting.
>> 
>> 
>> What I've done so far
>> - Running from USB memstick. Need to disable uart.1 or boot halts.
>> - Started working on sdhci_acpi driver
>> https://github.com/yohanesu75/freebsd/blob/sdhci-acpi-mmccampatch/sys/dev/sdhci/sdhci_acpi.c
>> which requires this patch
>> https://reviews.freebsd.org/D4761 (mmc on cam)
>> and is a work in progress and I'm kind of stuck because I don't know how to
>> do the IO port stuff so that the card can be detected..
>> 
>> (There is a BIOS option to run the SDHCI controller on PCI bus but it fails
>> to detect the eMMC memory. I think Intel (SD?|GP?)IO ports are required for
>> this which will be added support for in the D4761 patch.)
>> 
>> Working (out of the box - haven't tested everything)
>> - HDMI output
>> - Realtek GB Ethernet
>> - USB 2.0
>> 
>> Top priority would be to get eMMC storage working (on top of cam/mmc).
>> Other goals:
>> - Working GPIO
>> - Writing device drivers for SoC components like the ISP and on-board
>> chips.
>> - Hardware graphics rendering
>> - Power consumption optimizations
>> 
>> Have a nice weekend!
>> Johannes
>> 
>> --
>> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>> 秘密保持について:この電子メールは、名宛人に送信したものであり、秘匿特権の対象となる情報を含んでいます。
>> もし、名宛人以外の方が受信された場合、このメールの破棄、およびこのメールに関する一切の開示、
>> 複写、配布、その他の利用、または記載内容に基づくいかなる行動もされないようお願い申し上げます。
>> ---
>> CONFIDENTIALITY NOTE: The information in this email is confidential
>> and intended solely for the addressee.
>> Disclosure, copying, distribution or any other action of use of this
>> email by person other than intended recipient, is prohibited.
>> If you are not the intended recipient and have received this email in
>> error, please destroy the original message.
>> _______________________________________________
>> freebsd-hackers at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-hackers
>> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
>> 
>> 
>> _______________________________________________
>> talk mailing list
>> talk at lists.nycbug.org
>> http://lists.nycbug.org/mailman/listinfo/talk
> 
> _______________________________________________
> talk mailing list
> talk at lists.nycbug.org
> http://lists.nycbug.org/mailman/listinfo/talk




More information about the talk mailing list