[nycbug-talk] A problem of the nautilus-cd-burner in FreeBSD R5.3

[Wei Liu]

Thanks Dan. 
I used default/auto partition as you did, and df -m command yieds the
almost same results as you showed here. But the problem persists.

How did you install your nautilus-cd-burner? Did you install it using
"pkg_add" or "make install"? I noticed that many pepole mentioned that
nautilus-cd-burner has problems with traditional package "cdrtools". I
even tried to compile it using the package "cjk-cdrtools", but the
prblem remained unsolved.

Regards,

Wei


On Tue, 15 Mar 2005 07:38:05 -0500, Daniel Gonzalez
<dgonzo at optonline.net> wrote:
> I'm using 5.3-RELEASE also but I can't duplicate the trouble. I did
> notice that I used the default/auto partitioning scheme during the
> installation and /var is only allotted 250M. How large will the files be
> that you're trying to burn?. I don't know if I explained that clearly
> but here's what I get from df -m
> 
> dgonzo@~: cat /etc/fstab
> # Device                Mountpoint      FStype  Options         Dump
> Pass#
> /dev/ad1s1b             none            swap    sw              0       0
> /dev/ad1s1a             /               ufs     rw              1       1
> /dev/ad1s1e             /tmp            ufs     rw              2       2
> /dev/ad1s1f             /usr            ufs     rw              2       2
> /dev/ad1s1d             /var            ufs     rw              2       2
> /dev/acd0               /cdrom          cd9660  ro,noauto       0       0
> dgonzo@~: df -m
> Filesystem  1M-blocks Used Avail Capacity  Mounted on
> /dev/ad1s1a       247   56   171    25%    /
> devfs               0    0     0   100%    /dev
> /dev/ad1s1e       247    0   227     0%    /tmp
> /dev/ad1s1f      6248 4129  1618    72%    /usr
> */dev/ad1s1d       247   29   198    13%    /var*
> dgonzo@~:
> 
> Hope that helps. I'm relatively new to BSD (former Slackware user). For
> what it's worth, I've always had better luck using K3B. I don't know
> what your desktops requirements are, but it seems more intuitive to me.
> 
> Regards
> Dan Gonzalez
> 5ESS Maintenance Engineer
> Cablevision Lightpath
> 
> 
> Wei Liu wrote:
> 
> >Hello,
> >
> >I was experiencing a weird probelm with my FreeBSDR5.3 when I was trying
> >to burn a CD using the nautilus-cd-burner. Here is the description of my
> >operation:
> >
> >1) Drag the files to burn:/// window, and then click "Write to CD", with
> >the write speed being "Maximum Possible", Target to write being "ATAPI
> >CD-RW 40/12/48X 100C 100C".
> >2) Click "Write files to CD", and a popup window appears saying "Writing
> >to CD. Please wait. (Creating CD image)". Here I can see the progess bar
> >is moving, and seems everything are OK
> >3) A few seconds later, progess bar disappears, nothing happens to CD
> >burner, and nautilus-cd-burner left no respond.
> >
> >Using "dmesg", I got the following message:
> >"pid 2505 (mkisofs), uid 1001 inumber 535 on /var: filesystem full"
> >
> >I found there is a big file named "image.iso.eh25zd" under /var/tmp
> >directory. After I forced quit the dead nautilus-cd-burner, this file
> >disappears.
> >
> >I tried to write my files to an ISO file first, and then burn it to CD
> >using nautilus-cd-burner, everthing worked out smoothly.
> >
> >I have been using the FreeBSD4.10, and never encountered this problem.
> >What can I do to solve this problem? Thanks for your help.
> >
> >Wei
> >_______________________________________________
> >% NYC*BUG talk mailing list
> >http://lists.nycbug.org/mailman/listinfo/talk
> >%Be sure to check out our Jobs and NYCBUG-announce lists
> >%We meet the first Wednesday of the month
> >
> >
> >
>