[nycbug-talk] IPv6 NY-US Roll Call

[Isaac Levy]

Sorry to top-post,

THANK YOU JONATHAN!  Reading...

On Mar 22, 2007, at 5:50 PM, Jonathan Stewart wrote:

> Isaac Levy wrote:
>> Jonathan, anything, even the smallest tid-bits or URLS that led you
>>  to your setup would be most appreciated!!
>
> Alright then here goes.
>
> URLs
>
> http://www.no-ip.com/
> http://tunnelbroker.net/index.php
> http://www.kame.net/
> http://ipv6.klingon.nl/
> http://6bone.informatik.uni-leipzig.de/ipv6/stats/why-en.html
>
> A commented/stripped version of my rc.conf.
>
> # Setup interfaces on server/router like normal
> dhclient_enable="YES"
> ifconfig_fxp0="inet 10.70.3.1 netmask 255.255.255.0"
> ifconfig_nve0="DHCP"
> hostname="server.kc8onw.net"
>
> # Enable IPv6 on the system, must also be compiled into the kernel
> ipv6_enable="YES"
>
> # Allow the system to act as an IPv6 router
> ipv6_gateway_enable="YES"
>
> # This should be the v6 address at the other end of your tunnel
> ipv6_defaultrouter="2001:470:1F01:FFFF::1AE0"
>
> # Hurricane Electric uses gif tunnels so set one up here
> gif_interfaces="gif0"
>
> # Set source and destination v4 addresses for the tunnel
> gifconfig_gif0="72.230.86.229 64.71.128.83"
>
> # Set source and destination v6 addresses for the tunnel
> ipv6_ifconfig_gif0="2001:470:1F01:FFFF::1AE1 2001:470:1F01:FFFF:: 
> 1AE0 prefixlen 128"
>
> # This is the /64 allocated to me by hurricane electric
> # Set the XXXX::1 address on the internal network interface
> # as the gateway
> ipv6_ifconfig_fxp0="2001:470:1F01:3540::1 prefixlen 64"
>
> # Allow the system to send IPv6 router advertisement packets
> rtadvd_enable="YES"              # Set to YES to enable an IPv6 router
>
> # Specify that we only act as a v6 router on the internal subnet
> rtadvd_interfaces="fxp0"       # Interfaces rtadvd sends RA packets.
>
> Jonathan Stewart
>
> P.S. I'm willing to help over IM/phone/skype/etc if anyone is  
> interested, message me off list to work something out.
>