[nycbug-talk] clock running backwords

[George Georgalis]

On Fri, Sep 23, 2005 at 05:12:01PM -0700, pete wright wrote:
>On 9/23/05, George Georgalis <george at galis.org> wrote:
>>
>> Thanks, per the prior response, I think a bios upgrade would be
>> best on this 476.28-MHz 586-class CPU. However, IBM only has bios
>> for models similar to this Aptivia 2170 Model 830.
>>
>
>btw, is this an IBM workstation or server.  The machine I ran into
>this on was an x330.  just curious....

it's a workstation...

// George

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May  8 10:21:06 UTC 2005
    root at harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (476.28-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x58c  Stepping = 12
  Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
  AMD Features=0x80000800<SYSCALL,3DNow!>
real memory  = 67043328 (63 MB)
avail memory = 56008704 (53 MB)
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <SiS 530 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
atapci0: <SiS 530 UDMA66 controller> port 0x9880-0x988f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 0.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown> at device 1.1 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0x81300000-0x81300fff irq 11 at device 1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x7000-0x703f mem 0x80120000-0x8013ffff,0x80100000-0x80100fff irq 10 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:ea:f4:43
pci0: <multimedia, audio> at device 12.0 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 476282479 Hz quality 800
Timecounters tick every 10.000 msec
ata0-master: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 39205MB <Maxtor 6E040L0/NAR61590> [79656/16/63] at ata0-master UDMA33
acd0: CDROM <LTN403/DU22> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a

-- 
George Georgalis, systems architect, administrator <IXOYE><
http://galis.org/ cell:646-331-2027 mailto:george at galis.org